Page 47 Chapter 3 Halt On The item determines whether the system will stop if an error is detected at boot. While doing the installation, be careful in holding the compo- nents and follow the installation procedures. AGP is an interface specification designed for the throughput demands of 3D graphics. To print the manual completely, please, download it. If you want to configure the system by yourself, select Manaul.

Uploader: Tagar
Date Added: 10 June 2014
File Size: 44.9 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 60710
Price: Free* [*Free Regsitration Required]

Max Saving Maximum Power Management. System A password prompt appears every time when the com- puter is powered on or when end users try to run Setup. Hardware Setup Case Connectors: Remember to disable Spread Spectrum if ,si are overclocking because even a 0. Shielded interface cables and A. Selecting No allows users to configure the field manually.

You can wake up the computer via remote control through a local area network. If you want to play the Sound Blaster compatible games, you need to set the field to Enabled.

As processor technology pushes to ms6330 speeds and higher performance, thermal management becomes increasingly crucial when building computer systems.

  MS7308ET LAN DRIVER DOWNLOAD

MSI MS – motherboard – ATX – Socket A – KTA Overview – CNET

Page 2 Shielded interface cables and A. All Errors The system stops when any error is detected.

Hardware Setup Chapter 2. Enabled Shows a still image logo on the full screen at boot. When enabled, the BIOS will activate the floppy disk drives during the boot process: Floppy Disk Drive Connector: If the Security Option is set to System, the password is required both at boot and at entry to Setup.

Comments to this Manuals Your Name. AGP is an interface specification designed for the throughput demands of 3D graphics.

MSI MS-6330 Technical Manual

You can connect the Reset switch from the system case to this pin. If set to Enabled, the activity of the specified IRQ line will prevent the system from entering power saving modes or awaken it from power saving modes.

Enter text from picture: To print the manual completely, please, download it. Chapter 3 Halt On The item determines whether the system will stop if an error is detected at boot. Power current supplied via 12V power connector must exceed 10A. Host cycles that hit the aperture range are forwarded to AGP without any translation.

  ATHEROS AW-GE780 WIRELESS LAN CARD DRIVER DOWNLOAD

Safety Instructions Always read the safety instructions carefully. For some components, if you install in the wrong orientation, the components will not work properly.

The openings on the enclosure are for air convection hence protects the equipment from overheating. Chapter 3 Enabled and Disabled. If a modem is detected, the onboard modem controller will be enabled; if not, the controller is disabled. Atx 12v Power Connector: Page 63 Chapter 3 Mode. Page 29 Chapter 2 Power Switch Connect to a 2-pin push button switch.

As such, the processor must be maintained in the specified thermal requirements. Safety Instructions Safety Instructions Always read the safety instructions carefully.