We take every care in the preparation of this document, but no guarantee is given as to the correctness of its contents. When adding or removing expansion cards, make sure that you unplug the power supply first. Otherwise, the Line-Out connector on the back panel will not function. Always read the safety instructions carefully. The Spread Spectrum function reduces the EMI generated by modulating the pulses so that the spikes of the pulses are reduced to flatter curves. This information should be provided in the documentation from your hard disk vendor or the system manufacturer.

Uploader: Vudogor
Date Added: 12 December 2008
File Size: 17.65 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 34518
Price: Free* [*Free Regsitration Required]

Replace only with the same or equivalent type recommended by the manufacturer.

MSI MS-6533 drivers

LAN Jack optional Bottom: S3 STR The S3 sleep mode is a power-down state in which power is supplied only to essential components such as m-s6533 memory and wake-capable devices and all system context is saved to main memory.

When this area is reserved, it cannot be cached. Shutdown Temperature This option is for setting the shutdown temperature level for the processor.

20. Select Enabled to reset Extended System Configuration Data ESCD when you exit Setup if you have installed a new add-on and the system reconfiguration has caused such a serious conflict that the operating system can not boot. Setting to Off will allow users to use the arrow keys on the numeric keypad.


Static electricity may damage the components. The aperture is a portion of the PCI memory address range dedicated to graphics memory address space. Disabled Disable this sequence.

Settings are described below: After selecting it, the following message will appear: CPU Fan supports the fan control.

Never pour any liquid into the opening that could damage or cause electrical shock. When you are installing the CPU, make sure the CPU has a heat sink and a cooling fan attached on the top to prevent overheating. The module will only fit in the right orientation.

MSI MS – motherboard – micro ATX – Socket – SiS Overview – CNET

Then push down the power supply firmly into the connector. If set to Enabled, the activity of the specified IRQ line will prevent the BIOS Setup system from entering power saving modes or awaken it from power saving modes.

It’s a community-based project which helps to repair anything. Delay 4 Sec, Instant Off. Mount the fan on top of the heatsink. The hard disk will not work properly if you enter improper information for this category. Always read the safety instructions carefully. The password typed now will replace any previously set password from CMOS memory. Can only enter but do not have the right to change the settings of the setup menu. To operate properly, at least one DIMM module must be installed.


Award is a registered trademark of Award Software Inc. Power On Reboots the computer. Always On Always turn on. The user information of peripherals that need to use this area of system memory usually discusses their memory requirements.

Support For MS | Motherboard – The world leader in motherboard design | MSI Global

Keep this equipment away from humidity. Power Off Leaves the computer in the power off state.

Notice 2 Shielded interface cables and A. Hardware Setup Hardware Setup 2 This chapter provides you with the information about hardware setup procedures.

Day of Month Alarm You can choose which day of the preset month the system will boot up.

Can enter and change the settings of the setup menu.